Just checked and i'm finally on 4.2.4.3
yay
Update may have occurred earlier this week as it's been pretty stable since last weekend.
Been in bridge mode since my last post.
My setup;
My network -> Dell switch -> TrendNet Router w/wifi AP on (WAN dhcp enabled) -> CGN3 -> Rogers
Hopefully Rogers is paying attention to these forums/postings as they are certainly NOT contacting their CGN3 customers to let them know about the fix.
For the benefit of those who are struggling to check firware version in 'Bridge Mode' i did the following;
- Connected my laptop via LAN cable directly to one of the 4 ports on back panel of CGN3.
- Manually configure laptop ethernet adapter ip address to: 192.168.100.10, subnet mask 255.255.255.0, gateway 192.168.100.1
(left dns empty)
- Open a browser and point to 192.168.100.1
- Login userid & password was default (even though i had changed password before putting in 'Bridge Mode')
- Default screen shows Hardware version 1A, Firmware version 4.2.4.3