Re: Rogers has worst Netflix performance in Canada! Why?
techguy001 wrote:Not sure if everyone has already seen this but Rogers published a response in the last day or so to these comparisons in Canadian market. Netflix doesn't do these comparisons very...
View ArticleRe: Rogers has worst Netflix performance in Canada! Why?
Well, I don't think Netflix cares much about where any one ISP is at any point in time. What was interesting is that for Canada Bell showed up at the top of the list while Rogers showed up at the...
View ArticleRe: New Internet PLAN & Pricing Comparison
A suggestion to those switching to the HYbrid Fibre plans for INternet service in case this happens to you as well. I switched to Hybrid 60 from Extreme just after the new plans were announced and got...
View ArticleRe: Rogers has worst Netflix performance in Canada! Why?
techguy001 wrote:Well, I don't think Netflix cares much about where any one ISP is at any point in time. What was interesting is that for Canada Bell showed up at the top of the list while Rogers...
View ArticleRe: Rogers 6RD Service
Does anyone have the configuration info handy? The Rogers web page with that info appears to be missing in action.
View ArticleRe: Cisco DPC3825 slow, re-boot =OK?
Curious......what area are you located?Have been having similar issues, wondering when it will end??????
View ArticleDoes Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
Hello, we just upgraded our package and modem to the Hitron CGN3-ROG....and its a piece of junk. Drops the connection 3-4 times a day. I've read on here that people have gone back to the Cisco DCP3825...
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
The simple truth of the matter is that Hitron does not make a very good gateway modem. Unfortunately, it is the only 24-channel modem on the market and the only one that Rogers will support for the...
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
1. First of all what version of the firmware are you running on CGN3? If you just got the CGN3 it might run on the older version of the firmaware which was quite buggy and resulted in frequent dropped...
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
Ok, I used these settings to set it up: http://www.rogers.com/web/support/internet/home-networking/185?setLanguage=en Anyone have any tips on how to make it work better?
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
can i update the firmware? will using google dns affect the connection?
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
1. To make wireless work better try to use dedicated mode instead of mixed. If all your wireless devices support 802.11n than change wireless mode to N. 2. For 2.4 band manually find the least...
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
No, you cannot update the firmware yourself. You have to wait until it will be pushed to your gateway.
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
Using Google DNS will have no effect on congestion but might help you to resolve addresses faster. Just do not change DNS setting on the CGN3 - instead change DNS setting in your internet connection...
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
Tedd13 has given some great advice here. While the Cisco could reach the right speeds, comes down to how WELL it can. Compare it to a highway. The Cisco highway has 8 lanes. When it's not busy you...
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
I had a thought a few days ago. We've always assumed the rationale for the CGN3 requirement for the 60+ plans was to bond more than 8 D3 channels and the benefits of that are obvious. But I wonder if...
View Articlewanting to connect computer directly to modem
Hi, i am planning to connect my laptop directly to the modem and was wondering which type of ethernet cable is best..CAT5 or CAT6.
View ArticleRe: Does Cisco DCP3825 Support Hybrid Fibre 60? - save me from CGN3
That's possibly true as wellBut I am sure the channel thing is a big big part. I am on the cgn3 with the 30m plan, and it's got 20 downstream channels bonded. The more diverse the network the better
View ArticleRe: wanting to connect computer directly to modem
You would want cat5e (make sure it's 5e and not just 5) or 6. Generally you would see no improvement between 5e to 6 though in your setup.
View Article