Re: CGN3 and10/100 Mb/s device issue- need advice please.
hmm. If you could find a way to get to a Rogers store, I'm sure that exchanging it wouldn't be an issue. If you buy a gigabit switch, and some day manage to exchange the CGN3, having the switch...
View Articlepacket loss
I am getting random packet loss in my apartment building. It seems to be a problem for everyone in the build. This has been going on for about a week. When i talked to tech support the opened a ticket...
View ArticleRe: CGN3 and10/100 Mb/s device issue- need advice please.
Just an update for everyone or anyone that will get some problem..Tested again with my PS4 on wired (usually it's on wireless) established a good gigabit connection with CGN3 (yellow light) with 65/10...
View ArticleRe: CGN3 and10/100 Mb/s device issue- need advice please.
I'll be interested in your speedtest results when you have the following configuration: CGN3 > Gigabit Switch > Realteck port.
View ArticleRe: CGN3 and10/100 Mb/s device issue- need advice please.
I haven't bought a switch yet but planning on getting a new card / usb adapter
View ArticleRe: Packet Loss
If you look at your image there allmost all the loss is at level3. They are one of the most biggest interconnects in the us, and have many ISPs both Canada and is going through them. There have...
View ArticleSo thinking about going to Bell again....
My internet connection is crap. I pay for high speed but it's been dipping so low that my phone has a faster connection. I've gotten as high as 63mbps to a low of 1.06mbps which is rediculous!
View ArticleRe: So thinking about going to Bell again....
Ok, sooooo.....thats an interesting opening. If you're looking to vent, mission accomplished. If you're looking for help, there are forum members here who can help. But, they, and I would need some...
View ArticleRe: So thinking about going to Bell again....
A provider can have problems... or however their stuff connects to you having the issue, which can cause issues.What steps have you tried to troubleshoot it? Sometimes its something as simple as a...
View Articlerogers routing through odd places
i finally got pingplotter today because i've wondered why my unlimited high speed has been so slow- my results- the connection is ALWAYS routing through at least 4 guaranteed locations, one of which...
View ArticleRe: rogers routing through odd places
As has been mentioned further back in this thread. The TRUE Dod addresses, are not routable by normal means. Rogers is sort of.. squating on those IPs, and using them INTERNALLY only... as they were...
View ArticleClik here to view.
Re: rogers routing through odd places
If you want to post on another thread about your possible speed issues, we might be able to see if we can figure anything out (a bunch of us here have seen ALOT) Just post your location, what plan,...
View ArticleRe: My Rogers is routed thru a USA DoD server? (Department of Defence) Why?
That answers my DoD IP question but what about my question about them routing BACKWARDS up through amnitoba before going to a proper connection route? i see no reason for them to be routing my...
View ArticleHitron CGN3 Port Forwarding
Hi everyone, I got a brand new Hitron CGN3 modem from Rogers yesterday and I have been trying to set up port forwarding. First off, please tell me if anyone has every done it successfully. I have a...
View ArticleRe: My Rogers is routed thru a USA DoD server? (Department of Defence) Why?
That was my 2nd part. While it might appear to be going through Manitoba, it may not be. Are you able to post the full route? (Hard to analyze one node without seeing the before and after. Also is a...
View ArticleRe: Hitron CGN3 Port Forwarding
Port forwarding does work. I am doing an http forward on port 80, FTP on 21, and a media stream http on a higher number (forget at the moment). I think I see your issue though. Your trying to run the...
View ArticleRe: My Rogers is routed thru a USA DoD server? (Department of Defence) Why?
well, here's a pingplotter for google. the first 5 are the same no matter what IP/site that i put in. .. on second thought since rogers hates images, i'll give you a link to the pingplotter results...
View ArticleClik here to view.
Re: Hitron CGN3 Port Forwarding
Awesome! You made my day I spent so much time trying to figure out what was wrong... You were right, I accessed it from an external device and everything was fine! Thanks a lot.
View ArticleSOLUTION for: CGN3 (Rogers Advanced WiFi Modem) "VoIP phone issue
After hours with Vonage people and web surfing, here's the solution to get Vonage to work with the Hitron CGN3. Log into the CGN3 and follow the instructions in the link below. Use ports 5060 to 5061...
View Article