Re: Slow Internet
ok I did the test again wired and got 28.9/ 2.2I have Rogers enhanced moded for over a year maybe 2.Cisco DPC3825I found a thread with slow wireless problem with these modems but I can't walk around...
View ArticleClik here to view.
Re: Advanced Wi-Fi Modem using Hybrid Fibre 150
I'm throwing in the towel. This is too much for me to handle—I'm out of my depth here. I'll just put up with a slow connection until my wounds heal and I can get my hands on a new router. Thanks, guys.
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
Doing this step by step in slow time isn't a problem. There are people here who can guide you through the various items to check, one step at a time. Just takes a little patience. Don't worry about...
View ArticleRe: Slow Internet
The wired on the units.. are not GREAT.. mostly range though.. Speed not a much of an issue normally.Are you in an apartment or anything? Just curious, if too much interfearance might be an...
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
I'm trying to get those fast speeds I got before, but no luck. I called rogers to see if I could downgrade my modem to the CGN2, but they said that a new firmware is coming in a few days that could...
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
chh12 wrote:I'm trying to get those fast speeds I got before, but no luck. I called rogers to see if I could downgrade my modem to the CGN2, but they said that a new firmware is coming in a few days...
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
Huh? Thats interesting. Hopefully it will fix the throttling bug and the high latency issue. That will make this much easier for many people.
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
chh12, what happens if you reboot the CGN3? Will it temporarily restore the 200 Mb/s speeds? You indicated that you also had cable. Is that for a single tv, or do you have more than one cable box up...
View ArticleClik here to view.
Re: Advanced Wi-Fi Modem using Hybrid Fibre 150
Personally I think there is more to it than that. I say that as I and many others run the CGN3 at higher data rates, 250 Mb/s or higher and do so without issue, including the ethernet ports around the...
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
I would agree. Get a tech out.. they can replace the splitter as needed, put in a newer smaller one, or just straight connections, etc. And as per the mention above by the one tech, to swap back to a...
View ArticleRe: Slow Internet
Hey guys, I recently upgraded to the new hybird fibre 60 plan from rogers but i found that the new modem router only gives me 55mbps max on my phone (right beside my router), and when i step like 30-40...
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
Thanks, Guys. I took your advice and, just before going to swap the modem to the CGN2, I did another round of testing. I reset the modem and started testing it out, first without my tp-link router. The...
View ArticleRe: Slow Internet
Ok, a few things.Are you able to log into the router, and let us know what version of the firmware its on? Its on the first page that comes up.Some issues stemmed off the older firmware, mostly fixed...
View ArticleRe: Advanced Wi-Fi Modem using Hybrid Fibre 150
Not a problem. If you do flip back into Gateway mode at some time go ahead and paste the tables in at that time. I still think it would be an idea to call a tech in to check the cabling and install a...
View ArticleRe: Slow Internet
here it is... Firmware version:SW Version4.2.4.3 Wireless StatusThis menu displays the current wireless status.2.4 GHz Wireless Status Wireless Status (2.4 GHz) ON Wireless Mode (2.4 GHz) 802.11 b/g/n...
View ArticleRe: Hitron cgn2
Hey, I just got upgraded to the HF 60 plan, and they gave me a CGN2-ROG modem. You said they want everyone on CGN3 for plans 60 and above -- what gives?
View ArticleRe: Hitron cgn2
Rogers might be short of the CGN3s at this time. If you are near a Rogers store, you could always give them a call and enquire about CGN3s in stock, and swap the CGN2 for the 3 model. Meanwhile, you...
View ArticleRe: Hitron cgn2
All in all, it's best for the network, for more people to be on the cgn3, with the larger channel spread. But as datalink said, the stock seems to be iffy sometimes on them as they are rolling out so...
View ArticleRe: Slow Internet
It looks like your 5 Gghz wifi is running with Rogers default settings. Before you do anything, the first thing you need to do is navigate to the 5 Ghz wifi control tab which is under...
View ArticleClik here to view.
Re: Slow Internet
as long as you are sure on channel one, that is the fist step. (if you havent before, you could always run inSSIDer http://www.techspot.com/downloads/5936-inssider.html and scan and see whats around)...
View Article