Re: Slow speeds with Hybrid Fibre 30
Press the button and hold it for more than ten seconds to delete all user-configured settings and restart the CGN2 using its factory default settings. or Click WAN/LAN> Backup. In the screen that...
View ArticleRe: Slow speeds with Hybrid Fibre 30
Factory settings reset, the guest network is gone but the mystery network is still there.
View ArticleRe: Slow speeds with Hybrid Fibre 30
Ok, in that case your CGN2 is cooked. Tape a note to it explaining that using the USB setup stick has resulted in an additional noname wireless network being transmitted, on top of the network it is...
View ArticleRe: STAY AWAY from Rogers for ONLINE GAMING
It seems that your case is a different issue than mine. I wish I have just lag spikes. Although it is annoying it does not disconnect you from the game, which is my case since I have huge amount of...
View ArticlePort issues
I am trying to sort out my SIP issues on my phone system and have found out that my port 5060 appears to be blocked. CGN2 setup as Residential Gateway UPnP is off Test site (Sheilds Up)...
View ArticleRe: limiting internet times at home for kids
Can someone please give me step by step instructions on how to schedule my router. I have the same problem with someone using all of my internet GB. I would love for someone to answer asap please...
View ArticleRe: limiting internet times at home for kids
As stated earlier.. its easier said than done, depending on the unit, etc.Unplugging when not at home, is the most surfire way. But if you post what rogers modem/gateway you have, we can at least seee...
View ArticleRe: Port issues
Not sure.. that port may be blocked intentionally? (not sure if rogers home phone uses that port perhaps?) Best bet may be to put the rogers unit into briged mode, with a 3rd party router... might...
View ArticleRe: limiting internet times at home for kids
The other question that needs to be asked is: Is it really your kids chewing through your monthly download/upload limit on a day to day basis, or are you seeing an extraordinarily high data usage that...
View Articlerogers awful ping
Why is rogers so bad? I am currently visiting my wife's family in Brazil and started using the net to check on a few things. The net was dragging but when I checked the ping, it was showing 1ms on...
View ArticleRe: rogers awful ping
brazil http://www.speedtest.net/my-result/3835399823 whitby on http://www.speedtest.net/my-result/3773283284 also, i am not getting the full speed on my 250mb download as you can see with the hybrid...
View ArticleRe: rogers awful ping
Latency and ping times across the web from here, ie, Ontario are an ongoing issue. Can't help there unfortunately. But, I can help with the download rates. Have a read through a summary regarding...
View ArticleRe: rogers awful ping
The gamer part is why I noticed. It seems pointless playing video games while being a rogers customer. There is so much latency. Toyed with the modem and noticed thereis less latecy while the modem's...
View ArticleRe: rogers awful ping
You could also try runnng the CGN3 in bridge mode and use a third party router that has better performance specs. The one test that no one has done is to ping the CGN3 while its in bridge mode, just...
View ArticleRe: rogers awful ping
this issue has been going on for a while. I have had the cgn3 for more than 7 months, so the update should be more than cleared. I also went the route of using the modem in bridge mode; that only made...
View ArticleRe: rogers awful ping
Ok, have a look at my additional comments above and then have a look at the summary and the back of your CGN3 to determine what your interconnect data rates might be. Once you determine that and post...
View ArticleRe: rogers awful ping
Yeah. may be a while before I can post them but I do remember the have the data somewhere. The interesting thing is that a rogers employee told me just a week ago that everything is up to spec. what...
View ArticleRe: rogers awful ping
Downstream Signal Power at 0 dBmV, Signal to Noise around 40 dB, and Upstream Signal Power at 37 to 40 dBmV. Those Signal Power values are what you should see as normal values.
View ArticleRe: rogers awful ping
looking at a photo of info that i saved. signal power unsure. however, signal strength varies between -2 to -3.6 dBmV.signal to noise 36-38 dB
View Article